2 message and response, Message and response -10 – Yokogawa PR300 Power and Energy Meter User Manual
Page 89

5-10
<5. Modbus/RTU and ASCII Communication Protocols>
IM 77C01E01-10E
5.2
Message and Response
Function codes are command words used by the higher-level device to obtain the D
registers information of PR300.
Table 5.3 Function Codes
Code
Function
Description
03
06
08
16
Reads data from multiple D registers.
Writes data into D register.
Performs loop back test.
Writes data into multiple D registers.
Capable of reading data from a maximum of 64 successive
D registers between D0001 and D0400.
Capable of writing data into one D register between D0001
and D0400.
Used when checking communication wiring.
Capable of writing data into a maximum of 32 successive
registers between D0001 and D0400.
•
The write function codes cannot be written into read-only or user-prohibited D regis-
ters.
•
Broadcast addressing is possible with function codes 06 and 16 only. (Also in this
case, cannot be written into read-only or user-prohibited D registers.)
- EJA130A (4 pages)
- EJA120A (31 pages)
- EJA130A (47 pages)
- EJA120A (40 pages)
- EJA438 (5 pages)
- EJA120A (6 pages)
- EJA115 (85 pages)
- EJA120A (47 pages)
- EJA120A (79 pages)
- EJA130A (2 pages)
- EJA210A (70 pages)
- EJA430A (78 pages)
- EJA130A (4 pages)
- EJX120A (4 pages)
- EJA210E (9 pages)
- EJX115A (55 pages)
- EJA210E (41 pages)
- EJA210E (96 pages)
- EJA210E (52 pages)
- EJA210E (89 pages)
- EJA210E (170 pages)
- FlowNavigator Software (163 pages)
- EJX910A (55 pages)
- EJX910A (175 pages)
- EJX910A (83 pages)
- EJX910A (9 pages)
- EJX910A (103 pages)
- EJA530A (67 pages)
- EJA120A (83 pages)
- EJX530A (52 pages)
- EJA110E (4 pages)
- EJA110E (85 pages)
- EJX120A (85 pages)
- EJA118 (76 pages)
- EJX118A (64 pages)
- EJA438 (72 pages)
- EJA430E (85 pages)
- EJX430A (76 pages)
- EJA430E (7 pages)
- EJX430A (6 pages)
- EJX430A (40 pages)
- EJA430E (96 pages)
- EJA430E (41 pages)
- EJX438A (10 pages)
- ADMAG AXR (194 pages)