Yokogawa PC-Based MX100 - Manual (Page 4)

4 IM MX100-72E
4. Attaching and Removing the Terminal Block
The terminals of the input/output modules in the figure below can be removed.
The terminal block is
detachable.
4-CH, High-Speed Universal
Input Module 4-CH, Medium-Speed Strain
Input Module (-B12, -B35)
The terminal plate can be
attached and detached. The terminal plate can be
attached and detached.
Attachment screw (Loosen before
removing the terminal plate.)
Pull-out
handle
10-CH, Medium-Speed Universal Input
Module/6-CH, Medium-Speed 4-wire
RTD Resistance Input Module/10-CH,
Pulse Input Module/10-CH, High-Speed
Digital Input Module(-D05, -D24)
8-CH, Medium-Speed Analog
Output Module/8-CH, PWM
Output Module/10-CH,
Medium-Speed Digital Output Module
Pull-out
handle
Attachment screw (Loosen before
removing the terminal plate.)
The terminal block can be
attached and detached.
Attachment screw (Loosen before
removing the terminal block.)
Screw Terminal Block
You can connect a 10-channel screw terminal block (accessory sold separately, M4 screws) that can be attached to a DIN rail (see the
figure below) to the 10-CH, Medium-Speed Universal Input Module, 10-CH, Pulse Input Module, and 10-CH, High-Speed Digital Input
Module (-D05, D24).
To do so, remove the terminal plate from the module (not necessary with the /NS option since it has no terminal plate).
CH 1
CH 2
CH 3
CH 4
CH 5
CH 6
CH 7
CH 8
CH 9
CH 10
b B A
DIN rail
Latch lever
(Pull down to detach.)
Terminal
cover
b +/A
–/B
10-CH screw terminal block (772061)
10-CH screw terminal
block (772061)
Connection cable between the input module and
screw terminal block (772062-XXX*)
* The cable length is 050 or 100 cm.
Attachment to a DIN Rail
Loosen the attachment screw for
the connector cover and open
the connector cover.
Connector cover
Attachment screw for
connector cover
• 10-CH, Medium-Speed
Universal Input Module
• 10-CH, Pulse Input
Module
• 10-CH, High-Speed
Digital Input Module
Attachment
screw
Attachment
screw
Plate with Screw Terminals / Plate with Clamp Terminals for Current
You can attach the plate with screw terminals (sold separately) to the 10-CH, Medium-Speed Universal Input Module, 10-CH, Pulse Input
Module, and the 10-CH, High-Speed Digital Input Module (-D05 and -D24).
Also, you can attach the plate with clamp terminals for current (sold separately) to the 10-CH, Medium-Speed Universal Input Module.
To do so, remove the terminal plate from the module (not necessary for the /NS option since it has no terminal plate).
CH1
1
2
CH2
3
4
CH3
5
6
CH4
7
8
CH5
11 RTD 11 RTD
9
10
CH6
1
2
CH7
3
4
CH8
5
6
CH9
7
8
CH10
9
10
CH1 1
2
CH2 3
4
CH3 5
6
CH4 7
8
CH5
11 RTD 11 RTD
9
10
CH6 1
2
CH7 3
4
CH8 5
6
CH9 7
8
CH10 9
10
100Vpk MAX + TO -
CAT ll 120V MAX CH TO CH
600V MAX TO
Plate with Screw Terminals
(model: 772080)
• Terminal arrangement marking
on the terminal cover • Apperance
Plate with Clamp Terminals for Current
(model 772081 (10
Ω )/772082 (100 Ω )/772083 (250 Ω ))
• Terminal arrangement marking
on the terminal cover • Apperance
100mA
10
1
2
5
4
8
7
11
10
14
13
1
2
5
4
8
7
11
10
14
13