Yokogawa PC-Based MX100 - Manual

User’s
Manual
Yokogawa Electric Corporation
MX100/MW100
Data Acquisition Unit
Installation and Connection Guide
Foreword
Thank you for purchasing the MX100/MW100 Data Acquisition Unit. This guide describes concisely the installation and wiring procedures of
the MX100/MW100 Data Acquisition Unit. For more details on this topic as well as safety precautions (be sure to read), and the descriptions
of the functions and operations of the MX100/MW100 Data Acquisition Unit, see the MX100/MW100 Data Acquisition Unit User’s Manual
(electronic manual in PDF format) which is contained in the CD-ROM provided.
1. Installation Procedure
of Modules
3. Terminal Arrangement Markings
4. Attaching and Removing the Terminal Block
Screw Terminal Block
Plate with screw terminals
5. Wiring Procedure
6. Connecting the Power Supply
Inserting and Ejecting the CF Card
7. Connecting to the Ethernet Interface
Contents Displayed on the 7-Segment LED
Dipswitches *1
MX100
Types of Input/Output Modules
• 4-CH, High-Speed Universal Input Module (MX110-UNV-H04) • 10-CH, Medium-Speed Universal Input Module (MX110-UNV-M10)
• 30-CH, Medium-Speed DCV/TC/DI Input Module (MX110-VTD-L30) • 6-CH, Medium-Speed Four-Wire RTD Resistance Input Module (MX110-V4R-M06)
• 4-CH, Medium-Speed Strain Input Module (MX112-B12-M04) • 4-CH, Medium-Speed Strain Input Module (MX112-B35-M04)
• 4-CH, Medium-Speed Strain NDIS Input Module (MX112-NDI-M04) • 10-CH, Pulse Input Module *2 (MX114-PLS-M10)
• 10-CH, High-Speed Digital Input Module (MX115-D05-H10) • 10-CH, High-Speed Digital Input Module (MX114-D24-H10)
• 8-CH, Medium-Speed Analog Output Module (MX120-VAO-M08) • 8-CH, Meduim-Speed PWM Output Module (MX120-PWM-M08)
• 10-CH, Medium-Speed Digital Output Module (MX125-MKC-M10)
Main module
*2 Modules compatible with the MW100.
*1 Normally all dip switches are turned ON.
Used to initialize settings and for other purposes.
The figure on the left is the MX100 Main Module.
This is different from the overview of the MW100
Main Module. On the MW100, it is dip switch 1.
2. Installation Procedure
of the MX100/MW100
Overview of the Operation
1. Installation Procedure of Modules
• Attaching the Module
1. Prepare the base block.
When attaching the MW100, replace the current base block BRACKET with the BRACKET that came with the MW100.
Attach the bracket that came with the MW100 Remove the base block bracket
Bracket
When attaching the MX100, if using a conventional version of the main module, remove the base block BRACKET. If the main module has
been reworked, use the existing base block as-is. See “MX100/MW100: Handling of the Base Block (Model MX150-
■ ■ )” in IM MX100-75.
2. Check that the power supply is not connected to the main module.
7th Edition: February 2008 (YK)
All Right Reserved, Copyright © 2005 Yokogawa Electric Corporation
IM MX100-72E
7th Edition
*M
X1
0
0
7
2E0
7
*