2 conductor connection with quickon, 2 conductor connection with quickon -4 – Yokogawa RAKD User Manual

Page 18

Text mode
Original mode

<3. INSTALLATION>

3-4

IM 01R01B30-00E-E 5th edition January 01, 2013 -00

3.2.2 Conductor connection with Quickon

To connect the conductor, please observe in particular the following steps :

15 mm

F6.EPS

F7.EPS

- Strip the sheath to a length of approx. 15 mm
(fig. 3-4) and slide the union nut (1), the cap (2)
and the rubber seal (3) onto the conductor.

Fig. 3-4

Fig. 3-5

- Slide the rubber seal as far as the rim of the insulation and then slide the cap onto the rubber seal.
This provides the strain relief for the conductor (fig. 3-5).