Yokogawa EJA438 - Manual (Page 71)

IM 1C22J1-01E
REVISION RECORD
Title: Model EJA438W and EJA438N Diaphragm Sealed Gauge Pressure
Transmitter
Manual No.: IM 1C22J1-01E
Edition Date Page Revised Item
8th
9th
Mar. 1998 1-1
5-1
10-1
10-3
10-6
2-9+
CMPL
1
5.1
10.1.1
10.1.2
10.1.3
CMPL 1C22A1-02E 3rd 4th
Page 2
• Add FOUNDATION Fieldbus protcol version to ‘NOTE’ notice.
• Add Item 6 to the Wiring Precautions.
• Add FOUNDATION Fieldbus protocol.
• Add Output signal code F .
• Add Optional code A1.
• Change the figure of terminal configuration.
• Add Item 7-2.
REVISION RECORD.EPS
Sep. 1998
10th Feb. 2000
2-14
2-15
7-19
10-3
10-4
CMPL
2.10
2.10
7.3.2(8)
10.1.2
CMPL 1C22A1-02E 4th 5th
Page 2
CMPL 1C22J3-01E 1st 2nd
Page 4
• Delete EMC Conformity Standards Tables and move the
section to page 2-14.
• Remove Page 2-15.
• Correction made in BURN OUT figure.
• Add Process flange size/material code F and C.
• Add Electrical connection code 7, 8, and 9.
• Add Process flange size/material code F and J.
• Add Elactrical connection code 7, 8, and 9.
• Add Part No. to Item 3 (For PG13.5 and M20).
• Add Part No. to Item 10 (For 1/2 NPT, Pg13.5, and M20).
• Add 80 mm / 3-inch to Flange Rating and SUS316 Stainless
Steel Part No. to Flange material in Table 1.
Ϫ
2-8
2-9
5-1
5-3
7-4
–
9-6
CMPL
Changed to Electronic File Format.
Revised a book in a new format.
(The location of contents and the associated page numbers may
not coincide with the one in old editions.)
Major Revised Items:
2.9
2.10
5.2
5.4.2
7.3.1
–
9.3
CMPL 1C22A1-02E 5th 6th
CMPL 1C22J3-01E 3rd
1. Explosion class and option code of JIS flameproof approval.
Explosion class: Ex ds IIC T4(old) to Ex do IIC T4X(new).
Option code: /JF1(old) to /JF3(new)
2. Option code for flameproof packing adapter for JIS flameproof
approval.
Option code: /G1 and /G2(old) to /G11 and /G12(new)
3. Add “Pa” and “hPa” as the unit for calibration range.
4. Part number change for CPU Board Assembly.
• Add Figure 2.3 Example of using DCS.
• Add AS/NZS 2064 1/2 to EMI, EMC Conformity Standards.
• Add selection in the case of JIS flameproof type.
• Change option code for flame packing adapter.
Option code: G1 and G2
G11 and G12
Change Applicable cable O.D. and Identifying mark.
Part number: G9601AH G9601AM
Change the figure of flame proof packing adapter in Figure 5.4.2c.
• Add Pa and hPa to C20 and D31.
• Installation and Operating Precautions for JIS Intrinsically Safe
and Explosionproof Equipment:
EX-A01E
EX-A03E, EX-B01E EX-B03E
• Add Optional code F1.
• Change a format.
• Change and add Part No. of Item 7-1, CPU assembly:
Change; F9342BC
F9342BB, F9342BK F9342BJ
Add; F9342AF, F9342AM
• Change Part No. of
Item 10, Plug:
G9330DK G9330DP
• Change a format.