Watlow Silver Series EM - Manual (Page 2)

2 Watlow Silver Series OIT Installation Guide
Static Awareness
Do NOT remove the rear cover of your Silver Series EM product – doing
so will void your warranty. When the rear cover is removed the circuitry
inside is exposed to possible damage by electrostatic discharge during
handling. Minimize the possibility of electrostatic discharge by:
• Discharging personal static by grounding yourself prior to
handling the OIT.
• Handling the OIT at a static-free grounded workstation.
• Connecting the frame ground ( ) connector of the OIT to a
clean earth ground.
• Placing the OIT in an antistatic bag during transport.
Unpacking the Unit
Carefully unpack the OIT. Please read any instructions or cautions that
appear on the shipping container. Check all material in the container
against the packing list. Examine the equipment carefully; if any
shipping damage is evident, notify the carrier immediately. You are
responsible for claim negotiations with the carrier. Save the shipping
container and packing material in case the equipment needs to be stored,
returned, or transported for any reason.
Packing List
Silver Series EM Touchscreen
Power Connector
Mounting Clamps
Spare Fuse (Except HMI5043L)
0600-0101-0000 Rev A