Trouble – Avaya 10U100 User Manual

Page 21

trouble

E N G L I S H

s h o o t i n g

The remote
does not ring

I cannot hear
a dial tone

P R O B L E M

I T E M S T O C H E C K

• Make sure that the Ringer

is “On”.

• Ensure that the Telephone Cord

and the AC

Adapter

are installed correctly.

• Recharge the Remote Battery

by firmly placing it in

the Remote Charging Well

• Disconnect the AC Adapter from the power source and

reconnect it in a known good outlet.

• Use the Remote

in an area closer to the Base

• Make sure your Remote Rechargeable Battery

securely seated in the Charging Well

and/or fully

charged. The Battery may need to be charged for
8 hours prior to first use.

• Check that all cords are correctly connected and firmly

in place.

• Adjust the Dual Function Receive Volume Control

Key

up to increase the volume.

• Make sure the Remote is within range of the Base.

• Separate and then reconnect the Rechargeable Battery

and Remote

• Return the Remote to the Charging Well

for 5 seconds

to re-establish a communication link.

60653-01 10U100 UserGuide_r2 5/11/01 12:12 AM Page 20