Addonics Technologies RUBY CIPHER AES RCHD256ES User Manual
Page 4
Models: RCHD256ES & RCHD256EU
*Note: The Ruby Drive Cartridge System with the SATA interface must be
connected to a SATA controller with hot swap capability in order to add and
remove drive cartridge without rebooting. Please consult your motherboard or the
add-in card manufacturer to determine hot swap support on your SATA
controller. All of the Addonics SATA Host Controllers are hot swap capable.
Step 1: Connect a SATA cable to the 7-pin SATA data connector to the SATA
interface of the cradle.
Step 2: Connect a 15-
pin SATA power cable from your system’s power supply to
the SATA interface of the cradle. This power connection provides power to the
ruby drive cartridge system.
Step 3: Slide the Ruby enclosure inside the cradle. Insert the Cipher key. To turn
ON the drive enclosure, place switch on INT position.
Technical Support
If you need assistance to get your unit functioning properly, please call Addonics
Technical Support. Our technical staff will be happy to assist you, but they will
need your help to do so. Calling the technical support staff without all the proper
information can be both time consuming and frustrating. Here are some tips to
help you out:
MODEL NUMBER
– Please have this number on hand.
SYSTEM INFORMATION
– Type of computer, peripherals, etc.
OPERATING SYSTEM
– What version of Windows
WHAT’S THE TROUBLE? – Give enough information
about your problem so that we can recreate and diagnose it.
FREE Software Drivers for all Addonics Technologies
Products are available 24 hours per day at the
World Wide Web Site: www.addonics.com
Contact Information
Phone:
408-573-8580
Fax:
408-573-8588
Email:
http://www.addonics.com/sales/query/
TECHNICAL SUPPORT
Phone:
408-453-6212
Hours:
8:30 am - 6:00 pm PST
Email:
http://www.addonics.com/support/query/
Drive cradle
Drive
enclosure
Mounting holes for
3 ½” drive bay