Proface FP3900 - 19 Flat Panel" - Manual (Page 16)

16
Note
Regardless of the above clause, Digital
Electronics Corporation shall not be held
responsible for any damages or third-party
claims for damages or losses resulting from
the use of this product.
PFX105491L .FP3900-MT03E-BTH 2010.10. JM/C ©2009 Digital Electronics Corporation
Digital Electronics Corporation
8-2-52 Nanko Higashi, Suminoe-ku,
Osaka 559-0031, Japan
URL:http://www.pro-face.com/
The information in this document is subject to change without notice.
Applies the setting and then returns to the top menu.
Cancels the setting and then returns to the top menu.
• Be sure to perform the auto gain control when the
screen has both 100% black and 100% white areas
displayed.
Saves the setting and quits the OSD. Saves all the adjusted settings in the EEPROM.
End of OSD
Auto Gain (Analog RGB only)
Icon selection
Icon decision
• Be sure to perform the auto adjust while things
except that black are shown on sides of the dis-
play.
Switches Analog RGB and DVI-D, and quits the OSD.
Cancels the setting and then returns to the top menu.
Input Source
Auto Adjust (Analog RGB only)
Applies the setting and then returns to the top menu.
Cancels the setting and then returns to the top menu.
Resets all the settings and then returns to the top menu.
Cancels the setting and then returns to the top menu.
All Reset