Reelcraft Nordic Series 4800 Reels User Manual
Hose reel operations manual, 4800 series, Order #: model #: serial #: warning
7
Hose Reel Operations Manual
IMPORTANT
Read this manual carefully before installing,
operating or servicing this equipment.
PERSONAL SAFETY
Personal injury and/or equipment damage may result
if proper safety precautions are not observed.
ORDER #:
MODEL #:
SERIAL #:
WARNING:
Even low pressure can cause irreparable damage or death.
Exercise extreme caution while operating or servicing this equipment.
4800 SERIES
Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725
Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605
Customer Service: 855-634-9109 • [email protected] • www.reelcraft.com
Item #
Title
Quantity Item #
Title
Quantity Item #
Title
Quantity
1
FRAME WELDMENT ASSY
1
14
390171 ARBOR SPRING
1
27
S347-66 HEX CAP SCREW 3/8”-16 UNC X 1.25”
4
2
BEARING
1
15
GUIDE ASSY BOX
1
28
S347-53 HEX CAP SCREW 5/16”-18 X 3/4”
3
3
BEARING HOUSING SUB ASSY
1
16
PAT888AL CASTING BEARING SPACER
1
29
S347-65 HEX CAP SCREW 3/8”-16 UNC X 1”
18
4
SPINDLE
1
17
S350-41 WASHER SMALL 3/8”
18
30
327258 RATCHET
1
5
GOOSENECK
1
18
S350-6 WASHER 3/8”
20
31
S360100 PAWL BRACKET ASSY
1
6
SUPPORT SHAFT
1
19
S339-616 LOCK WASHER 3/8”
34
32
261275 KEY ARBOR
1
7
DRUM
1
20
S338-6 HEX NUT 3/8”-16 UNC
22
33
SPINDLE MOUNTING FLANGE
1
8
HEAD FLUID PATH SIDE
1
21
S347-611 HEX CAP SCREW 3/8”-16 UNC X 2.5”
6
34
S347-47 HEX CAP SCREW 1/4-20 X 1.5”
3
9
HEAD SUPPORT SIDE
1
22
S347-615 HEX CAP SCREW 3/8”-16 UNC X 3.5”
2
35
S350-4 WASHER 1/4”
3
10
INLET
1
23
S376-59 HEX CAP SCREW (5/16-18 X 2)
1
36
S339-416 LOCK WASHER 1/4”
3
11
TIE ROD
6
24
S85-7 NYLOC NUT (5/16-18)
1
37
S338-4 HEX NUT 1/4”-20
3
12
SPRING CASE ASSEMBLY
1
25
S339-516 LOCK WASHER 5/16”
2
13
327279 MOUNTING BRACKET
2
26
S347-55 HEX CAP SCREW 5/16”-18 X 1”
2
To order replacement parts pleas provide the
following information:
∙ Model number
∙ Serial number
∙ Part description and/or balloon number listed
below. *Some parts may not be shown, in this
case a detailed part description will be required.