Reelcraft Series M7000 Spring Driven Hose Reels (Low and Medium Pressure MxxxxOLP118, MxxxxOMP118) - Manual

Operating Instructions
Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725
Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605
Customer Service: 855-634-9109 • [email protected] • www.reelcraft.com
Form# 1223-816 Rev: 4/2013
Read this manual carefully before installing, operating or
servicing this equipment.
IMPORTANT
Dimensions
• Ensure that reel is properly installed before connecting input and
output hoses.
• Bleed fluid/gas pressure from system before servicing reel.
• Before connecting reel to supply line, ensure that pressure does
not exceed maximum working pressure rating of reel.
• Remember, even low pressure is very dangerous and can cause
personal injury or death.
• Be aware of machinery and personnel in work area.
• If a leak occurs in the hose or reel, remove system pressure
immediately.
• A high tension spring assembly is contained within the reel.
Exercise extreme caution.
• Pull hose from reel by grasping the hose itself, not the control
valve.
• Ensure that reel, hose, and equipment being serviced are
properly grounded. Use an ohmmeter to check ground
continuity.
• If reel ceases to unwind or rewind, remove system pressure
immediately. Do not pull or jerk on hose!
• Treat and respect the hose reel as any other piece of machinery,
observing all common safety practices.
M7800 OLP118 M7800 OMP118
M7900 OLP118
Series M7000 Spring Driven Hose Reels
Low and Medium Pressure Model Numbers:
SAFETY
Personal injury and/or equipment damage may result if proper safety
precautions are not observed.
A 20 1/4”
B 19 3/4”
C 7 13/16”
D 3 7/8”
E 7”