Reelcraft Series DP5000 Spring Driven Hose Reels (Low Pressure DPxxxxOLP) - Manual

Read this manual carefully before installing,
operating or servicing this equipment.
IMPORTANT
Operating Instructions
Series DP5000 Spring Driven Hose Reels
Low Pressure Model Numbers:
Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725
Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605
Customer Service: 855-634-9109 • [email protected] • www.reelcraft.com
Form# 1203-909 Rev: 5/2013
DP5400 OLP DP5600 OLP DP5650 OLP
DP5435 OLP DP5635 OLP DP5800 OLP
DP5450 OLP DP5605 OLP DP5835 OLP
Dimensions
DP5400 / DP5435
DP5450 / DP5600
DP5635
DP5605 / DP5650
DP5800 / DP5835
A 16 3/8” 16 3/8”
B 14 3/8” 14 3/8”
C 7” 7”
D 4” 5”
E 8” 9”
SAFETY
Personal injury and/or equipment damage may result if proper safety precautions are not observed.
• Ensure that reel is properly installed before connecting input and output hoses.
• Bleed fluid/gas pressure from system before servicing reel.
• Before connecting reel to supply line, ensure that pressure does not exceed maximum working pressure rating of reel.
• Remember, even low pressure is very dangerous and can cause personal injury or death.
• Be aware of machinery and personnel in work area.
• If a leak occurs in the hose or reel, remove system pressure immediately.
• A high tension spring assembly is contained within the reel. Exercise extreme caution.
• Pull hose from reel by grasping the hose itself, not the control valve.
• If reel ceases to unwind or rewind, remove system pressure immediately. Do not pull or jerk on hose!
• Treat and respect the hose reel as any other piece of machinery, observing all common safety practices.