Rapid-Air PALLET MASTER (PMD): PMD35 & PMD50. 115VAC, 1PH, 60HZ - Manual (Page 4)

Rapid Air Corporation
CONTROL ARM SETUP & INSTALLATION
Determine the direction of rotation in which the material shall decoil as it leaves
the pallet reel. Position the pallet reel in line with the entrance side of the press.
Install the control arm assembly in the control head hub such that the counter
weight is pointing toward the turntable. Position the control head and arm and
check that it is locked before proceeding
The following sketches will show some basic arrangements of the pallet reel. The
choice depends upon such factors as loading ease, clockwise or counter clockwise
wound coils, and floor space available.
file:///C|/Web_develop/Pallet%20Master.htm (6 of 46) [12/10/2001 3:38:22 PM]