Rapid-Air PALLET MASTER (PMD): PMD35 & PMD50. 115VAC, 1PH, 60HZ User Manual
Page 25

Rapid Air Corporation
5.
Nominal trimpot settings are as follows (expressed in % of full CW
rotation):
TABLE 1: NOMINAL TRIMPOT SETTINGS
MIN (minimum speed): 15% CL (current limit/torque): 65%
MAX (maximum speed): 65% ACCEL (acceleration start): 20%
IR (IR compensation): 25% DECEL (deceleration stop): 20%
PLUG IN HORSEPOWER RESISTOR
A Plug-In Horsepower Resistor must be installed to match the RAMM to
the motor horsepower and voltage. See table 2 for the correct value. Plug-In
Horsepower Resistors are stocked by your distributor.
file:///C|/Web_develop/Pallet%20Master.htm (28 of 46) [12/10/2001 3:38:23 PM]