Rapid-Air PALLET MASTER (PMD): PMD35 & PMD50. 115VAC, 1PH, 60HZ - Manual (Page 17)

Rapid Air Corporation
A. Used to contain the ID of the coil from springing inward and falling down
into the coil below.
B. Also used to keep coil in place when the diameter becomes very small,
otherwise the coil may slide off the unit at the smallest diameter.
C. The overall length of the ID keeper can be cut off to suit. Depending on
the majority of coil ID ranges used.
OPTIONAL EQUIPMENT
The remote jog consists of approx. 10 feet of cord to which a jog button is
attached via the connector on the control box. This can be used instead of
manually jogging the pallet reel at the control box. The cord plugs directly into
an existing external connector provided on the control box arm. This feature
allows the operator to move about more freely while threading the unit.
MACHINE MAINTENANCE
1. Gear Box—The gear box has a four quart capacity and is filled with Mobil
#SHE-630 synthetic oil. The oil level should be checked monthly and filled as
needed.
file:///C|/Web_develop/Pallet%20Master.htm (20 of 46) [12/10/2001 3:38:23 PM]