beautypg.com

Warnings – Ramsey Winch RPH-40000 2 SPEED W/AIR TENSIONER User Manual

Page 3

background image

1

RAMSEY HYDRAULIC PLANETARY WINCH MODEL RPH 40,000

PLEASE READ THIS MANUAL CAREFULLY

This manual contains useful ideas in obtaining the most efficient operation from your Ramsey Winch, and
safety procedures one needs to know before operating a Ramsey Winch. Do not operate this winch until
you have carefully read and understand the "WARNINGS" and "OPERATION" sections of this manual.

WARRANTY INFORMATION

Ramsey Winches are designed and built to exacting specifications. Great care and skill go into every winch
we make. If the need should arise, warranty procedure is outlined on the back of your self-addressed
postage paid warranty card. Please read and fill out the enclosed warranty card and send it to Ramsey
Winch Company. If you have any problems with our winch, please follow instructions for prompt service on
all warranty claims. Refer to back page for limited warranty.

SPECIFICATIONS* (LOW SPEED MODE)

NOTE: The rated line pulls shown are for the winch only. Consult the wire rope manufacturer for wire rope
ratings.

WARNINGS:

CLUTCH MUST BE TOTALLY ENGAGED BEFORE STARTING THE WINCHING OPERATION.
DO NOT START WINCH MOTOR BEFORE ENGAGING CLUTCH.
DO NOT DISENGAGE CLUTCH UNDER LOAD.
STAY OUT FROM UNDER AND AWAY FROM RAISED LOADS.
STAND CLEAR OF CABLE WHILE PULLING. DO NOT TRY TO GUIDE CABLE.
DO NOT EXCEED MAXIMUM LINE PULL RATINGS SHOWN IN TABLE.
DO NOT USE WINCH TO LIFT, SUPPORT, OR OTHERWISE TRANSPORT PEOPLE.
A MINIMUM OF 5 WRAPS OF CABLE AROUND THE DRUM BARREL IS NECESSARY TO HOLD THE LOAD.
CABLE ANCHOR IS NOT DESIGNED TO HOLD LOAD.

Rated Line Pull

(lbs.)

40,000

(Kg.)

18,100

Gear Reduction

51.35:1

Weight (without cable)

1

2

3

4

5

6

lbs.

40,000

33,500

28,800

25,300

22,500

20,300

Kg.

18,100

15,100

13,000

11,400

10,200

9,200

ft.

25

55

95

135

185

235

m

7

16

28

41

56

71

FPM

16

18.7

21

24

27

29

MPM

4.8

5.6

6.3

7.2

8.2

8.8

LAYER OF CABLE
*Rated line pull
per layer

*Cable Capacity

………………………………………………………
………………………………………………………

……………………………………………………………

700 lbs. (318 Kg)

……………………………………………

*Line Speed
(at 17 GPM)
* These specifications are based on recommended wire rope of .75 inch dia. extra
improved plow steel or equivalent