Ramsey Winch RPH-20000 (SPEC. FOR CHEVRON) User Manual

Page 13

Text mode
Original mode

11 OM-914032-0503-D

13. With pin (item #44) installed in coupling, slide coupling (item #5) over end of input shaft below.

Slide coupling over end of shaft (item #12). Place gasket (Item #34) into position on motor
mounting surface of end bearing (item #8). Insert brake shaft into coupling. Use (2) screws (item
#21) to attach brake assembly to motor end bearing. Torque capscrews to 85 ft lbs each.

14. Attach motor (item #37) with well oiled gasket (item #32) to brake (item #31). Use (2) capscrews

(item #20) and torque to 74 ft. lbs. each. Securely connect tube (item #46) to elbow (item #29), in
valve (item #47), and brake (item #31).