Avaya IP Office 4.2 - Manual (Page 45)

IP Phone Installation Page 45
15-601046 Issue 14a (23 June 2008) IP Office 4.2
Other Installation Options: VLAN and IP Phones
Example setup - Overview
The network is devised to allow the user PC to connect to the switch port of the IP Phone. A single cable then connects
PC and IP Phone to the Ethernet Switch. For the purpose of this example VLAN 209 is used for voice traffic and VLAN 210
for data traffic. The LAN1 interface of the IP Office control unit resides on the voice VLAN while the LAN2 interface
resides in the data VLAN. Communications between the voice and data VLAN’s is facilitated by the IP Office control unit’s
router function.
HP-Switch - Configuration
Shown below are the web and CLI configuration output from the HP Procurve Switch.. These where obtained using the
configuration guidelines which can found below.
Figure 1 HP Procurve Web Configuration