Ramsey Winch FORD QM KIT 295375 - Manual (Page 4)

3
STEP 4
Hold receiver assembly #1 between R.H. & L.H. mounting arms #4 & #5. Make sure R.H. and L.H.
arms are installed so that slotted mounting holes on flanges are on the outside.
Insert (1) 1/2-13NC x 1.25” capscrew #9 through rear hole in R.H. bracket #4. Secure using (1)
lockwasher #12 and (1) nut #11. Repeat for L.H. bracket #4.
Next, insert (1) 1/2-13NC x 1.25” capscrew #9 through (1) lockwasher #12, front hole of R.H. bracket
#4, and into threaded nutsert in receiver.
Repeat for L.H. bracket #5.
Align and tighten all 1/2" hardware.
If necessary, license plate can be mounted to receiver using (2) 1/4-20 x .50” capscrews #6 with
lockwashers #11, as shown below.
Install receiver cover #15 as shown.
THROUGH HOLE
1
THREADED HOLE LICENSE
PLATE
11 13
9
9 13
4
15
5
6 12