Ramsey Winch FORD QM KIT 295375 - Manual (Page 2)

1
DO NOT TIGHTEN HARDWARE UNTIL INSTRUCTED!
STEP 1
Remove vehicle tow hooks. Discard existing hardware.
STEP 2
Insert nut plate #2 into R.H. mounting arm assembly as shown below. Attach nut plate to mounting
arm using (2) 1/2-13NC x 1.25” capscrews #9 through lockwashers #13 and flat washers #14 into
front nutserts in nut plate.
Repeat for L.H. bracket assembly #4.
2
ALIGN NUT PLATE WITH THE
FOUR REAR HOLES IN
MOUNTING ARM ASSEMBLY.
SECURE WITH (2) CAPSCREWS
IN THIS LOCATION. REAR
CAPSCREWS ARE INSTALLED
IN A LATER STEP.
4
9 13 14