Ramsey Winch FORD GRILL GUARD KIT 295368 - Manual (Page 6)

16. Install Grille Tube (Item #5) between the mounting
brackets, placing shims (Item #20) between mount-
ing brackets and ends of tube. Use (2) 3/8-16NC X
3/4 capscrews (Item #10) and lockwashers (Item
#15).
17. Align channel and mounting brackets and
tighten front hardware to proper torque val-
ues before tightening back hardware (see
Torque Value Chart).
18. Mount fairlead to channel assembly using
hardware supplied with winch. Bolts should
go through upper holes on fairlead. Tighten
fairlead mounting bolts to 34 ft. lbs (46 Nm)
torque.
19. Place winch in Channel Assembly (Item
#6). Use supplied mounting hardware to
attach winch to Channel Assembly. Refer to
Winch manual for mounting instructions.
Tighten winch mounting bolts to 55 ft. lbs.
(75 Nm) torque.
6
Zinc finish capscrews and
nuts used for clarity. Kit con-
tains black finish hardware.