Ramsey Winch FORD GRILL GUARD KIT 295368 - Manual (Page 2)

1. Unfasten plastic splashguard from radiator support brack-
et. Loosen, but do not remove, the two bolts on the arms
of the bumper support bracket as shown at top right.
2. Remove the bolt attached to the vehicle frame. Repeat for
other side of vehicle.
3. Remove the three nuts on the underside of the blocker bar
as shown at middle right. Remove blocker bar.
On some models, to remove the blocker bar, remove the
four bolts that hold the blocker bar to the bracket as
shown below.
4. Note: On diesel models, disconnect engine heater plug
from back side of bumper. Models with Fog lights, unplug
lights and pull harness loose from back side of bumper.
5. Remove vehicle bumper and tow hooks.
2