Ramsey Winch DODGE GRILL GUARD KIT 295370 (RE WINCH) - Manual (Page 5)

7. Install grille tubes (item #5) to right and left hand side
plates as shown at right. Use (2) 3/8-16NC capscrews
(item #9) and shims (item #22) for each tube.
Do not tighten until told to do so.
8. Install the fairlead using 3/8-16NC hardware supplied with
the winch as shown at right.
Do not tighten until told to do so.
9. If needed, install the license tag brackets (item #3) to the
underside of the winch frame as shown at right using (2)
1/4-20NC self-tapping screws. These screws go into holes
on the left side of the underside of the winch frame.
Tighten to 5 ft-lbs (7 Nm) torque.
Install the license plate to the brackets using (4) 1/4-20NC
capscrews (item 8), nuts (item #15), and lockwashers
(item #17).
5