Ramsey Winch DODGE GRILL GUARD KIT 295370 (RE WINCH) - Manual (Page 3)

It is a good idea to install the mounting bracket assembly
entirely on one side, then start on the other. Install bolts
loosely—do not tighten until told to do so.
2. Loosen and remove factory bolt assembly nuts. Figure at
right is view from under vehicle looking up at frame. The
bolt assembly points away from vehicle frame.
3. If vehicle is diesel, push oil cooler up to access factory
bolt assembly (see figure at right).
Remove factory bolt assembly and install bolt assembly
through mounting arm (item #6) then vehicle frame.
Tighten nuts on bolt assembly according to Torque Value
Chart on page 6.
Repeat for the left side.
Bumper
Oil Cooler
Factory Bolt
Assembly
3