Ramsey Winch DODGE GRILL GUARD KIT 295370 (RE WINCH) - Manual (Page 4)

4. Place winch in Frame Assembly (item #4) and install using
hardware as shown at right. Install (3) 3/8-16NC 1” long
socket head capscrews (item #12) and high collar lockwash-
ers (item #19) in the front, right three mounting holes.
Install (2) 3/8-16NC 3/4” long socket head capscrews (item
#13) and high collar lockwashers (item #19) in the front and
back left mounting holes.
Install (3) 3/8-16NC 1” long hex head capscrews (item #9)
and regular lockwashers (item #18) in the rear, left three
mounting holes.
Do not tighten until told to do so.
Assistance is required for the next steps.
5. Attach the right and left side plates
(item #1) to the winch frame using (3)
1/2-13NC x 1-3/4” capscrews (item
#11), nuts (item #16) and lockwash-
ers (item #20).
Do not tighten until told to do so.
6. Lift the winch and side plate assembly into place on the right and
left mounting arms (items #6 and7). Install the side plates (item
#1) into the mounting arms using (3) 1/2-13NC x 1-3/4” cap-
screws (item #11), nuts (item #16), and lockwashers (item
#20).
Do not tighten until told to do so.
4