Warranty information, Specifications: conforms to sae j706 – Ramsey Winch HD-234 User Manual
Page 4
RAMSEY WINCH MODEL HD-234
PLEASE READ THIS MANUAL CAREFULLY.
This manual contains useful ideas in obtaining the most efficient operation
from your Ramsey Winch, and safety procedures one needs to know before
operating a Ramsey Winch.
WARRANTY INFORMATION
Ramsey Winches are designed and built to exacting specifications. Great
care and skill go into every winch we make. If the need should arise, war-
ranty procedure is outlined on the back of your self-addressed postage paid
warranty card. Please read and fill out the enclosed warranty card and send
it to Ramsey Winch Company. If you have any problems with your winch,
please follow instructions for prompt service on all warranty claims. Refer to
back page for limited warranty.
SPECIFICATIONS: CONFORMS TO SAE J706*
NOTE: The rated line pulls shown are for the winch only. Consult the
wire rope manufacturer for wire rope ratings.
LAYER OF CABLE
1
2
3
4
*Rated line pull
lbs.
8,000
6,700
5,700
5,000
per layer
kg
3,620
3,030
2,610
2,290
**Long Drum
ft.
25
60
95
140
Cable capacity
m
8
18
30
43
**Short “Y” Drum
ft.
15
30
55
75
Cable capacity
m
4
9
16
22
**Line speed
FPM
28
34
39
44
MPM
8,6
10,1
11,7
13,4
* Winch only conforms to SAE J706. For SAE qualification of mounting angles, if applicable, consult
Ramsey Engineering
** These specifications are based on recommended wire rope of 3/8 inch diameter extra improved plow
steel or equivalent.
Rated Line Pull (lbs.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8,000
(kg) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3,620
Gear Reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34:1
Weight HD-234 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110lbs. (50 kg)
HYD-234 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105 lbs. (48 kg)
4