Ramsey Winch HD-234 - Manual (Page 13)

13. Press bearing (item #17)
onto worm (item #14) Note:
Be sure that thick shoulder
of bearing’s outer race (side
with manufacturer’s name
and part number) is out,
away from worm threads.
Press bearing and worm into
gear housing. Slip gasket
(item #27) onto bearing cap
(item #2). Use four cap-
screws (item #20) to secure cap to gear housing. Tighten capscrews to 8 ft-lbs.
(10.8 Nm) each.
14. Press bearing (item #17) onto worm and into
gear housing. Note: Be sure that thick shoul-
der of bearing’s outer race (side with manu-
facturer’s name and part number) is out, away
from worm threads.
13
14
17
17
2
20
27
17
27
37