Ramsey Winch HD-234 LEVER STYLE - Manual (Page 13)

10
13. Press bearing (item #17) onto worm (item #14) Note: Be sure that thick
shoulder of bearing’s outer race (side with manufacturer’s name and part
number) is out, away from worm threads. Tap key (item #11) into worm.
Press bearing and worm into gear housing. Slip gasket (item #27) onto
bearing cap (item #2). Use four capscrews (item #20) to secure cap to
gear housing. Tighten capscrews to 8 ft-lbs. (10.8 Nm) each.
14. Press bearing (item #17) onto worm and into
gear housing. Note: Be sure that thick shoulder of
bearing’s outer race (side with manufacturer’s name
and part number) is out, away from worm threads.
17
17
14
27
20
2
11
38
27
17