Ramsey Winch GEARBOX REPLACEMENT KIT RAMSEY/AUBURN TO QGBX RPH20/25 256115 - Manual (Page 4)

8. Carefully set motor end bearing on
drum assembly. Secure motor end
bearing to drum using C-clamp.
Install winch in upright mounting frame
using 4 capscrews (items #16 &
#17) and lockwashers (item #24).
Tighten securely.
9. Place gasket (Item #8*) into position on motor mounting surface of end
bearing (item #8). Insert brake shaft into coupling. Use (2) screws (item
#20) to attach brake assembly to motor end bearing. Torque capscrews
to 85 ft lbs each.
2
1
8
16 25
16 25
17 25
17 25
8*
10
8
20
32
4