Ramsey Winch QM-9000 for H2 - Manual

Congratulations!
You have purchased the finest winch available in its service
class. The Quick Mount
TM is a detachable winch. It can be
easily mounted to the front or rear of the H2 for self recovery
and other applications. It allows one winch to be used on mul-
tiple vehicles, and can be quickly installed and removed to
avoid extra vehicle weight.
The Quick Mount TM comes with a 12 ft. remote control switch,
anti-theft locking pin and a hawse fairlead. Optional 5 ft., 20
ft. or 24 ft. battery cables for front or rear mounting are avail-
able.
The Quick Mount TM features a highly efficient 3 stage planetary
gear set which transmits torque from a series wound D.C.
motor. A positive clutch allows free spooling for quick cable
deployment. An automatic load holding brake is designed to
hold the full rated capacity of the winch. It was designed and
manufactured to provide you with the utmost in utility. As with
any device that combines power and movement in its use,
there are dangers if improperly used. At the same time, there
are easier and faster ways for getting the job done if certain
precautions are taken first.
Please read this manual carefully. It contains useful ideas in
obtaining the most efficient operation from your Ramsey
Winch and safety procedures you need to know before begin-
ning use.
When you follow our guidelines for operation, your Ramsey
Winch will give you many years of satisfying service. Thank
you for choosing Ramsey. You will be glad you have one
working for you.
Please Note: Ramsey Quick Mount TM series winches are
designed for front and rear mount vehicle use. The winches
are not designed for and should not be used in industrial
applications (car haulers /carriers, wreckers, hoisting, etc.),
and Ramsey does not warrant them to be suitable for such
use. Ramsey makes a separate, complete line of winches for
industrial/commercial use. Please contact the factory for
additional information.
Ramsey Winch Company
Owner’s Manual
Front Mount Electric Winch
Model Quick Mount 9000
for Hummer 2
SPECIFICATIONS
Layer of Cable 11 22 33 44 55
(lbs) 9,000 7,300 6,200 5,400 4,700
(kg) 4,070 3,300 2,800 2,440 2,130
(ft)* 15 35 60 90 105
(m)* 4 10 18 27 32
(lbs) NO 2,000 4,000 6,000 9,000
(kg) LOAD 900 1,810 2,720 4,070
(FPM) 29 15 11 9 7
(MPM) 8.8 4.6 3.3 2.7 2.1
Amp Draw (12V) 90 190 245 315 400
* DEPENDS ON CABLE BEING UNIFORMLY WOUND ONTO DRUM.
Ramsey performance data is compiled from actual winch testing.
Line Speed First Layer
Rated Line Pull Per
Layer
Cumulative Cable
Capacity Per Layer
(5/16"-8mm-dia. Cable)
Line Pull First Layer
Contents
Performance Specifications . . . . . . . . . . . . . . . .Front Cover
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Tips for Safe Operation . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Techniques of Operation . . . . . . . . . . . . . . . . . . . . . . . . . .3
Assembling Your Winch . . . . . . . . . . . . . . . . . . . . . . . . . .4
Electrical Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Clutch Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Remote Control Operation . . . . . . . . . . . . . . . . . . . . . . . . .6
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Cable Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Winch Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
CAUTION: Read and understand this manual before installation and operation of winch. See Safety Precautions.