Alliance Laundry Systems UW125AV - Manual (Page 7)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Programming
5 F232226
Programming Cycle Segments
The machine has 30 wash cycles available. 26 wash
cycles are pre-programmed. All wash cycles may be
edited as follows:
1. Enter programming mode. Refer to Entering
Program Mode section.
2. Press “ ∧” keypad to enter Program Mode.
3. Press the cycle number of the cycle to be edited.
4. Press the START keypad to move into the menu
of options. Refer to Figure 1
NOTE: While cycle is running, pressing the
START keypad shows the temperature. Pressing
the START keypad again displays the cycle.
Pressing the START keypad again returns display
to time remaining.
Control Panel
Figure 1
CHM1766C
1 Cycle Keypad “1” 11 Spin Cycle LED
2 Cycle Keypad “3” 12 Rinse Cycle LED
3 Cycle Keypad “5” 13 Add Bleach LED
4 Rapid Advance/Up Edit 14 Wash Cycle LED
5 Cycle Keypad “2” 15 Out-of-Balance Indicator Dot
6 Cycle Keypad “4” (Variable-speed only)
7 Cycle Keypad “6” 16 High Water Level Indicator Dot
8 Stop/Down Edit 17 Medium Water Level Indicator Dot
9 START Keypad 18 Low Water Level Indicator Dot
10 Door Open LED
CHM1766C
< <
1 2
3 4
5 6
1
5
6
7
8
4
2 15 16 17 18
3 9
10
11
12
13
14