AVerMedia Technologies 500 - Manual (Page 6)

Chapter 1 Introduction
3
- Traditional Zoom and Pan
Users can zoom in (200%) the computer screen on TV and pan around freely
to any part of the screen.
- Area Zoom
This function cuts the screen into 9 parts and allows you to select the desired
part through the available buttons on the remote control.
- AVerMedia  POINTER Zoom
You can point to a key area in your presentation using AVerMedia Pointer and
then enlarge that area. (AVerKey500 Pro only supports this function for VGA
resolutions up to 1024 x 768)
- AVerMedia  SPOT Zoom
Once you have highlighted a certain area using AVerMedia Spot, you can zoom
in and out of the highlighted area. (AVerKey500 Pro only supports this
function for VGA resolutions up to 1024 x 768)
• Up to 7 Sharpness Selections
The AVerKey500 Pro gives you up to 7 flicker-filter selections which provide
100% flicker-free TV display.
• Video Switcher
Connect the AVerKey500 Pro with a computer and a video source such as a
LaserDisc player or VCR. Select either source to be your final TV output.
• Linear Adjustment, Vertical and Horizontal Scale
Adjust both the screen width and height! This is one very special feature not
found in most video converters. A wide selection of sizes are available.
• Full Screen Underscan/Overscan
Full Screen Underscan/Overscan prevents your images from being "chopped
out". (Note: Images will not be chopped off for resolutions up to 1600 x 1200.)
• Screen Freeze/Unfreeze
Screen Freeze lets you pause the TV display and make changes to your
presentation without your audience knowing it. You can also prolong the time
of display when you are giving demos.
• Auto Power On
AVerKey500 Pro powers on automatically after you have connected the proper
cables to your TV, PC & AVerKey500 Pro.
AND MORE!