AVerMedia Technologies 500 - Manual (Page 13)

AVerMedia AVerKey500 Pro User’s Manual
10
Installing AVerKey500 Pro to a Macintosh or PowerPC
¬ Connect the supplied Computer Extension Cable to the AVerKey500 Pro
“VGA IN” port.
­
Attach the Computer Adapter to the other end of the Computer Extension
Cable. Then, plug the Computer Adapter along with the attached Computer
Extension Cable to the monitor port on the back panel of your Macintosh
PC.
(Note : The Computer Adapter is provided as an optional accessory.)
®
Attach the Monitor Adapter to your Macintosh monitor. Then, plug the
Monitor Adapter with the attached monitor cable to the AVerKey500 Pro
“MONITOR” port.
(Note : The Monitor Adapter is provided as an optional accessory.)