AVerMedia Technologies 500 User Manual
Page 10

Chapter 2 Hardware Installation and Setup
7
®
MONITOR
:
Connect the VGA or Macintosh display monitor to this port.
A Monitor Adapter is needed to connect the Macintosh
display monitor. (The Monitor Adapter is provided as an
optional accessory.)
¯
MOUSE/ADB : For IBM PC or compatible :
If you need to use your wired mouse, connect the mouse to
this port.
Use the supplied RS-232 Cable to connect a Microsoft
compatible mouse to this port.
For Macintosh :
Connect the ADB devices (e.g. keyboard, mouse, etc.) from
your Macintosh computer to this port.
°
PC/ADB :
For IBM PC or compatible :
Connect the supplied RS-232 Cable between this port and
the serial port on your PC if you connected a Microsoft
compatible mouse to the AVerKey500 Pro.
For Mac :
Connect the supplied ADB Cable between this port and the
Macintosh computer's ADB port.
±
SCART
RGB : If you want to use a SCART RGB monitor with your PC
and the AVerKey500 Pro, connect it to this port using the
SCART RGB Cable.
(Note : The SCART RGB Cable is an optional accessory
cable supplied with the AVerKey500 Pro.)