Lincoln Electric IM10027 SAE400 - Manual (Page 19)

C-1 ACCESSORIES C-1
K930-2 TIG Module - Provides high frequency plus a
gas valve for TIG welding. A water valve is available as
an option. Requires 115 volt AC input. (Limited to 250A
- 60% Duty Cycle).
K802-D Power Plug Kit - Kit includes male plug for 20
amp receptacle.
K2641-2 Trailer - FOUR-WHEEL STEERABLE YARD
TRAILER WITH DUO-HITCH
• For off-road, plant and yard use with an overall width
of 55 in.
• Includes an automatically engaging drawbar lock
when the drawbar is raised to the vertical position.
• 13 in wheels with wheel bearings packed with high
viscosity, high pressure, low washout Lubriplate®
grease.
• Stiff 3/16 in welded rectangular steel frame construc-
tion is phosphate etched and powder coat painted for
superior rust and corrosion resistance.
• Also includes a Duo-Hitch™ - a 2 in Ball/Lunette Eye
combination hitch.
K2637-1 Trailer - A 2-wheel trailer designed for road (1) ,
off road, in-plant and yard towing. Trailer mounts
directly to welder base. Comes standard with a Duo-
Hitch™, a 2” Ball and Lunette Eye combination hitch.
Order:
K2636-1 Trailer
K2639-1 Fender & Light Kit
K2640-1 Cable Storage Rack
1 For highway use, consult applicable federal, state and local laws regarding
possible requirements for brakes, lights, fenders, etc.
Pipe Thawing with an arc welder can cause fire,
explosion, damage to electric wiring or to the arc
welder if done improperly. The use of an arc welder
for pipe thawing is not approved by the CSA, nor is
it recommended or supported by Lincoln Electric.
------------------------------------------------------------------------
K704 Standard Accessory Kit - Includes electrode
and work cables, headshield, work clamp and elec-
trode holder.
K385-[ ] CV Adapter - Provides constant voltage out-
put for semiautomatic welding. (Field installation only).
K1735-1 MULTI-WELD 350 - For multiple arcs from
the DC output of a welding power source. See bulletin
E5.300 for Multi-Weld 350 and distribution system.
K2144-1 Oil Drain Kit- Includes ball valve, hose and
clamp.
SAE-400®
WARNING