Lincoln Electric IM10040 POWER WAVE C300 - Manual (Page 57)

C-1 ACCESSORIES C-1
POWER WAVE ® C300
OPTIONS / ACCESSORIES
STICK OPTIONS
K875 ACCESSORY KIT - 150 Amp
For stick welding. Includes 20 ft.
(6.1m) #6 electrode cable with lug,
15 ft. (4.6m) #6 work cable with
lugs, headshield, filter plate, work
clamp, electrode holder and sam-
ple pack of mild steel electrode.
K857, K857-1 REMOTE OUTPUT
CONTROL
Requires K2909-1, 6-pin to 12-pin
adapter.
Portable current control provides the
same dial range as the current control on
the welder. Consists of a 6-pin Amphenol
connector which plugs into the remote
control Amphenol. 25 foot cable length.
TIG OPTIONS
PTA-17
Premium Air-Cooled Models
K1782-2
PTA-17 TIG Torch (12.5 ft 3.8m) 2
CABLES
K1782-4
PTA-17 TIG Torch (25 ft 7.6m) 2 CABLES
PTA-26
Premium Air-Cooled Models
K1783-2
PTA-26 TIG Torch (12.5 ft 3.8m) 2 CABLES
K1783-4
PTA-26 TIG Torch (25 ft 7.6m) 2 CABLES
K870 FOOT AMPTROL
Requires K2909-1, 6-pin to 12-pin
adapter.
K870-2 FOOT AMPTROL
(12-pin plug connection)
Depress pedal to increase current. Depressing pedal
fully achieves maximum set current. Fully raising the
pedal finishes the weld and starts the Afterflow cycle.
K963-3 HAND AMPTROL
Requires K2909-1, 6-pin to 12-pin
adapter.
Provides 25 ft (7.6m) of remote cur-
rent control for TIG welding. (6-pin
plug connection).
K963-4 HAND AMPTROL
Provides 25 ft (7.6m) of remote current control for TIG
welding. (12-pin plug connection).