IEI Integration AUPS-C20 v1.02 - Manual (Page 16)

AUPS-C20 UPS Module
Page 8
1.6 Battery Specifications
The AUPS-C20 can be installed with four Li-ion smart batteries. The Li-ion battery
specifications are listed below.
Specification/Battery Model BAT-LI-4S2P3800
Battery Type Li-ion
Nominal Capacity 3800 mAH
Nominal Voltage 14.8 V
Max. Charge Voltage 16.8 V
Cut Off Voltage 11.2 V
Recommended Charge Current (Max.) 2 A
System Continuous Discharging
Current (Max.)
7.6 A
The End of Charge Condition 200 mA/min
Discharge Protection UVP/OCP
Charge Protection OVP/OCP
Self-discharge Rate 340 uA ~ 440 uA
Dimensions 165 mm x 76 mm x 26 mm
Weight 450 g
Ambient Temperature 0°C ~ +40°C
Storage Temperature -20°C ~ +60°C
Cycle Life 300 charge/discharge cycles
Backup 100 W/10 min
Safety Class CE, FCC
Table 1-4: AUPS-C20 Battery Specifications