IEI Integration EP-308A v1.15 - Manual (Page 98)

EP-308A/EP-308AS POS
Page 88
WARNING:
The precautions outlined in this chapter should be strictly followed.
Failure to follow these precautions may result in permanent damage to
the EP-308A/EP-308AS.
A.1 Safety Precautions
Please follow the safety precautions outlined in the sections that follow:
A.1.1 General Safety Precautions
Please ensure the following safety precautions are adhered to at all times.
ƒ Follow the electrostatic precautions outlined below whenever the
EP-308A/EP-308AS is opened.
ƒ Make sure the power is turned off and the power cord is disconnected
whenever the EP-308A/EP-308AS is being installed, moved or modified.
ƒ Do not apply voltage levels that exceed the specified voltage range.
Doing so may cause fire and/or an electrical shock.
ƒ Electric shocks can occur if the EP-308A/EP-308AS chassis is opened
when the EP-308A/EP-308AS is running.
ƒ Do not drop or insert any objects into the ventilation openings of the
EP-308A/EP-308AS.
ƒ If considerable amounts of dust, water, or fluids enter the
EP-308A/EP-308AS , turn off the power supply immediately, unplug the power
cord, and contact the EP-308A/EP-308AS vendor.
ƒ DO NOT do the following:
o DO NOT drop the EP-308A/EP-308AS against a hard surface.
o DO NOT strike or exert excessive force onto the LCD panel.
o DO NOT touch any of the LCD panels with a sharp object
o DO NOT use the EP-308A/EP-308AS in a site where the ambient
temperature exceeds the rated temperature