IEI Integration EP-308A v1.15 - Manual (Page 94)

EP-308A/EP-308AS POS
Page 84
4.1 System Maintenance Introduction
If the components of the EP-308A/EP-308AS fail they must be replaced, such as the
wireless LAN module or the motherboard. Please contact the system reseller or vendor to
purchase the replacement parts. Back cover removal instructions and jumper settings for
the EP-308A/EP-308AS are described below.
4.2 Motherboard Replacement
In the case of motherboard failure, please contact an IEI sales representative, reseller or
system vendor. The motherboard is accessible after opening the rear cover.
4.3 Cover Removal
WARNING!
Turn off the power before removing the bottom cover . Risk of
electrocution. Severe damage to the product and injury to the body
may occur if internal parts are touched while the power is still on.
The bottom cover of the EP-308A/EP-308AS must be removed. To remove the bottom
cover, remove the screws then lift the cover off.