1 troubleshooting, Figure 2–12: u-slot alignment, Figure 2–13: push down firmly – IEI Integration EP-308A v1.15 User Manual
Page 29
EP-308A/EP-308AS POS
Page 19
Step 3:
The paper should pass through the U-slot as shown below.
Figure 2–12: U-slot Alignment
Step 4:
Push the cover down firmly until it clicks into place.
S
te
p
0
:
Figure 2–13: Push Down Firmly
2.8.1 Troubleshooting
When paper or cutter jams, do not open the cover with a sharp object. Follow the guide
below to troubleshoot:
Step 1:
Push the cover down firmly until it clicks into place.