2 wlan card replacement, Figure 6-4: ddr so-dimm module installation, Figure 6-4 ) – IEI Integration AFL2-W07A-N26 User Manual

Page 79

AFL2-W07A-N26

P a g e 63

Figure 6-4: DDR SO-DIMM Module Installation

S te p 10:

Replace the internal aluminum cover and secure it to the chassis using five (5)

retention screws.

S te p 11:

Replace the back cover and secure it using ten (10) previously removed

retention screws.

S te p 0:

6.5.2 WLAN Ca rd Re p la c e m e n t

The AFL2-W07A-N26 has one WLAN card slot. To replace the WLAN card, follow the

instructions below.

S te p 1:

Follow all anti-static procedures. See Section 6.2.

S te p 2:

Turn off the power. See Section 6.3.

S te p 3:

Remove the back cover. See Section 6.4.1 above.

S te p 4:

Remove the internal back cover. See Section 6.4.2 above.

S te p 5:

Locate the WLAN card.

S te p 6:

Disconnect the main and auxiliary antennas on the WLAN module and push the

two spring clips in to release the WLAN card (Figure 6-5).