IEI Integration AFL2-W07A-N26 - Manual (Page 38)

AFL2-W07A-N26
P a g e 22
4.1 An ti-s ta tic P re c a u tio n s
WARNING:
Failure to take ESD precautions during the maintenance of the
AFL2-W07A-N26 may result in permanent damage to the
AFL2-W07A-N26 and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the AFL2-W07A-N26. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the AFL2-W07A-N26 is accessed internally, or any other
electrical component is handled, the following anti-static precautions are strictly adhered
to.
 Wear an anti-static wristband: - Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.
 Self-grounding: - Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.
 Use an anti-static pad: - When configuring the AFL2-W07A-N26, place it on
an antic-static pad. This reduces the possibility of ESD damaging the
AFL2-W07A-N26.
 Only handle the edges of the PCB: - When handling the PCB, hold the PCB
by the edges.
4.2 In s ta lla tio n P re c a u tio n s
When installing the flat bezel panel PC, please follow the precautions listed below:
 Power turned off: When installing the flat bezel panel PC, make sure the
power is off. Failing to turn off the power may cause severe injury to the body
and/or damage to the system.
 Certified Engineers: Only certified engineers should install and modify
onboard functionalities.