Figure 5-1: back cover retention screws – IEI Integration AFL-xxA-N270-Series v1.03 User Manual

Page 76

AFL-xxA-N270 Series Panel PC

Page 60

Figure 5-1: Back Cover Retention Screws

Step 4:

Lift the cover off and pull down the cover a bit to make it possible to lift the cover

further more after removing the retention screws (Figure 4-2). More strength is

required to separate the cover from the chassis.

Step 0:

Figure 5-2: AFL-xxA-N270 Plastic Back Cover Removal

5.4.2 AFL-xxA-N270 Series Internal Aluminum Cover Removal

To remove the internal aluminum cover, follow the steps below.

Step 1:

Remove the retention screws securing the internal aluminum cover. The screw

numbers are varied in different models. Figure 5-3 shows the aluminum cover

retention screws of the AFL-10A-N270.