IEI Integration AFL-xxA-N270-Series v1.03 User Manual

Page 61

AFL-xxA-N270 Series Panel PC

Page 45

Step 6:

Insert the four monitor mounting screws provided in the wall mount kit into the

four screw holes on the real panel of the flat panel PC and tighten until the screw

shank is secured against the rear panel (Figure 4-13).

WARNING:

Please use the M4 screws provided in the wall mount kit for the rear panel.

If the screw is missing, the thread depth of the replacement screw should

be not more than 4 mm.

Step 7:

Align the mounting screws on the monitor rear panel with the mounting holes on

the bracket.

Step 8:

Carefully insert the screws through the holes and gently pull the monitor

downwards until the monitor rests securely in the slotted holes (Figure 4-13).

Ensure that all four of the mounting screws fit snuggly into their respective

slotted holes.

NOTE:

In the diagram below the bracket is already installed on the wall.