IEI Integration TANK-800-D525 v1.14 - Manual (Page 42)

TANK-800 Embedded System
Page 30
Pin Description Pin Description
1 DIN0 6 DOUT2
2 DOUT0 7 DIN3
3 DIN1 8 DOUT3
4 DOUT1 9 VCC5
5 DIN2
Table 3-1: DIO Connector Pinouts
Figure 3-18: DIO Connector Pinout Location
3.7.6 LAN Connectors
CN Label: RJ45
CN Type: RJ-45
CN Location: See Figure 1-2
CN Pinouts: See Table 3-2
The LAN connectors allow connection to an external network.
Step 1: Locate the RJ-45 connectors . The locations of the RJ-45 connectors are
shown in Figure 1-2.
Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the TANK-800. See Figure 3-19.