IEI Integration TANK-800-D525 v1.14 - Manual (Page 133)

TANK-800 Embedded System
Page 121
ƒ Be cautious of all small removable components when vacuuming the
TANK-800.
ƒ Turn the TANK-800 off before cleaning the TANK-800.
ƒ Never drop any objects or liquids through the openings of the TANK-800.
ƒ Be cautious of any possible allergic reactions to solvents or chemicals used
when cleaning the TANK-800.
ƒ Avoid eating, drinking and smoking within vicinity of the TANK-800.
B.2.2 Cleaning Tools
Some components in the TANK-800 may only be cleaned using a product specifically
designed for the purpose. In such case, the product will be explicitly mentioned in the
cleaning tips. Below is a list of items to use when cleaning the TANK-800.
ƒ Cloth – Although paper towels or tissues can be used, a soft, clean piece of
cloth is recommended when cleaning the TANK-800.
ƒ Water or rubbing alcohol – A cloth moistened with water or rubbing alcohol
can be used to clean the TANK-800.
ƒ Using solvents – The use of solvents is not recommended when cleaning the
TANK-800 as they may damage the plastic parts.
ƒ Vacuum cleaner – Using a vacuum specifically designed for computers is
one of the best methods of cleaning the TANK-800. Dust and dirt can restrict
the airflow in the TANK-800 and cause its circuitry to corrode.
ƒ Cotton swabs - Cotton swaps moistened with rubbing alcohol or water are
excellent tools for wiping hard to reach areas.
ƒ Foam swabs - Whenever possible, it is best to use lint free swabs such as
foam swabs for cleaning.