IEI Integration TANK-GM45A - Manual (Page 48)

TANK-GM45 Embedded System
Page 38
4.3.3 Super IO Configuration
Use the Super IO Configuration menu (BIOS Menu 6) to set or change the
configurations for the FDD controllers, parallel ports and serial ports.
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Exit
Configure Super I/O Chipset
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
Serial Port1 Address
[3F8/IRQ4]
Serial Port3 Address [3E8]
Serial Port3 IRQ [10]
Select RS232 or RS422/RS485 [RS422/485]
Allows BIOS to select
Serial Port Base
Addresses
ÅÆ Select
Screen
↑ ↓ Select
Item
Enter Go to SubScreen
F1 General
Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 6: Super IO Configuration
ƒ Serial Port1 Address [3F8/IRQ4]
Use the Serial Port1 Address option to select the Serial Port 1 base address.
Î
Disabled No base address is assigned to Serial Port 1
Î
3F8/IRQ4 D EFAULT
Serial Port 1 I/O port address is 3F8 and the interrupt
address is IRQ4
Î
2F8/IRQ3 Serial Port 1 I/O port address is 2F8 and the interrupt
address is IRQ3
Î
3E8/IRQ4 Serial Port 1 I/O port address is 3E8 and the interrupt
address is IRQ4
Î
2E8/IRQ3 Serial Port 1 I/O port address is 2E8 and the interrupt
address is IRQ3