IEI Integration SPCIE-C2160 - Manual (Page 94)

SPCIE-C2160 PICMG 1.3 CPU Card
Page 78
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Advanced
Floppy Disk Controller Configuration
Floppy Disk Controller [Enabled]
Device Settings IO=3F0h; IRQ=6; DMA=2
Change Settings
[Auto]
Device Mode [Read Writer]
Enable or Disable Floppy
Disk Controller
---------------------
ÆÅ: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General
Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 12: Floppy Disk Controller Configuration Menu
Î Floppy Disk Controller [Enabled]
Use the Floppy Disk Controller option to enable or disable the floppy disk controller.
Î
Disabled Floppy disk controller disabled
Î
Enabled D EFAULT Floppy disk controller enabled
Î Change Settings [Auto]
Use the Change Settings option to select an optimal setting for the super IO device.
Î
Auto D EFAULT The super IO device settings are automatically
detected.
Î
IO=3F0h;
IRQ=6;
DMA=2
The I/O port address is 3F0h, the interrupt address is
IRQ6 and the DMA is 2.
Î Device Mode [Read Write]
Use the Device Mode option to select the floppy disk controller mode.
Î
Read Write D EFAULT Select this option for normal operation.