IEI Integration SPCIE-C2160 - Manual (Page 100)

SPCIE-C2160 PICMG 1.3 CPU Card
Page 84
Î Change Settings [Auto]
Use the Change Settings option to change the parallel port IO port address and interrupt
address.
Î
Auto D EFAULT The parallel port IO port address and interrupt
address are automatically detected.
Î
IO=378h;
IRQ=5
Parallel Port I/O port address is 378h and the
interrupt address is IRQ5
Î
IO=378h;
IRQ=5, 7
Parallel Port I/O port address is 378h and the
interrupt address is IRQ5, 7
Î
IO=278h;
IRQ=5, 7
Parallel Port I/O port address is 278h and the
interrupt address is IRQ5, 7
Î
IO=3BCh;
IRQ=5, 7
Parallel Port I/O port address is 3BCh and the
interrupt address is IRQ5, 7
Î Device Mode [STD Printer Mode]
Use the Device Mode option to select the mode the parallel port operates in.
Configuration options are listed below.
ƒ STD Printer Mode Default
ƒ SPP Mode
ƒ EPP-1.9 and SPP Mode
ƒ EPP-1.7 and SPP Mode
ƒ ECP Mode
ƒ ECP and EPP 1.9 Mode
ƒ ECP and EPP 1.7 Mode
5.3.10 F81866 H/W Monitor
The F81866 H/W Monitor menu (BIOS Menu 16) contains the fan configuration submenu,
and displays the system temperature and CPU fan speed.