IEI Integration SPCIE-C2160 - Manual (Page 112)

SPCIE-C2160 PICMG 1.3 CPU Card
Page 96
5.4.2 PCH-IO Configuration
Use the PCH-IO Configuration menu (BIOS Menu 26) to configure the PCH parameters.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Chipset
Auto Power Button Status [Disabled (ATX)]
Restore AC Power Loss [Last State]
> PCI Express Configuration
> PCH Azalia Configuration
Power Saving Function(ERP)
[Disabled]
Select AC power state
when power is re-applied
after a power failure.
When Auto Power Button
Function select Enabled
the AC power loss will
always power on.
---------------------
ÆÅ: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General
Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 26: PCH-IO Configuration
Î Restore AC Power Loss [Last State]
Use the Restore AC Power Loss BIOS option to specify what state the system returns to
if there is a sudden loss of power to the system.
Î
Power Off The system remains turned off
Î
Power On The system turns on
Î
Last State D EFAULT The system returns to its previous state. If it was on, it
turns itself on. If it was off, it remains off.
Î Power Saving Function(ERP) [Disabled]
Use the Power Saving Function(ERP) BIOS option to enable or disable the power
saving function.
Î
Disabled D EFAULT Power saving function is disabled.
Î
Enabled Power saving function is enabled. It will reduce power
consumption when the system is off.